Applicable diameter range: The Automatic Rebar Tying Machine is suitable for strapping steel bars with diameters from 4mm to 45mm. This means that whether it is a small steel bar or a thicker steel bar, as long as its diameter is within this range, it can be tied with a fully Automatic Rebar Tying Machine.

1. The operation is very simple and convenient, single-hand operation can improve the safety factor of workers; 2. Efficient and fast operation, the bundling efficiency is 3-4 times that of manual bundling efficiency, and 50-60 knots can be bundled per minute;

The latest type of large-caliber steel strapping machine RT-550 developed by our company is now under test and will soon be launched for the market. Please look forward to it!

After nearly a year of efforts to develop and improve, our new upgraded steel strapping machine has been successfully launched. More complete models, a wider range of use, more stable quality! You are welcome to contact us for more up-to-date information.

Before installing the strapping wire, turn the main switch to the "Off" position, lock the trigger lock, and remove the battery case. This tool can only use the matching strapping wire.

The four strapping modes of RT280S,RT450S, RT528 and RT545 are divided into two and three turns, and the two strapping modes of RT580S and RT558 are divided into three and four turns. The new strapping machines RT-441 and RT-650 have only one round of strapping.

1. Press the wire feeder arm forward so that the wire feeder horn is open 2. Open the latch on the side cover of the cable tray so that the side cover pops out and the cable tray can be taken out